feat(iot): repackaged Odoo iot modules + Fusion Plating sensor wrapper

Phase A of the IoT initiative — gets the server-side infrastructure
in place before the Raspberry Pi hardware arrives, so the iot admin
UI + /fp/iot/ingest endpoint are ready to accept the first real
temperature reading as soon as the Pi is wired up.

New top-level folder: fusion_iot/

1. **iot_base/** — Odoo S.A. iot_base module, copied from
   RePackaged-Odoo verbatim. LGPL-3 upstream, no changes needed.

2. **iot/** — Odoo S.A. iot module, repackaged:
   - `models/update.py` neutralised (removed the publisher_warranty
     IoT-Box-counting report that phones home to odoo.com for
     enterprise licence enforcement)
   - `iot_handlers/lib/load_worldline_library.sh` deleted (proprietary
     Worldline payment lib fetch from download.odoo.com, not needed)
   - `wizard/add_iot_box.py._connect_iot_box_with_pairing_code` —
     upstream called odoo.com's iot-proxy to resolve pairing codes;
     replaced with a no-op. Pi-side iot_drivers proxy registers
     directly with this Odoo server instead.
   - Manifest rebranded with an explicit changelog preamble.

3. **fusion_plating_iot/** — new plating-specific wrapper:
   - `fp.tank.sensor` — maps an iot.device (or a direct-HTTP-ingest
     sensor) to a fusion.plating.tank + fusion.plating.bath.parameter.
     Supports DS18B20, PT100/1000, pH, conductivity, level. Per-sensor
     alert_min/max overrides.
   - `fp.tank.reading` — append-only time-series. On create, evaluates
     against sensor's alert range. On in-spec → out-of-spec TRANSITION,
     auto-raises a fusion.plating.quality.hold (once per excursion,
     no spam during sustained out-of-spec).
   - `POST /fp/iot/ingest` — shared-secret HTTP endpoint for sensors
     bypassing the Pi proxy. Token via X-FP-IOT-Token header OR body.
     Accepts single-reading or batch payloads.
   - Menu under Plating → Operations → Sensors & Readings.
   - Tank form inherits get a Sensors tab inline.

Deployed to entech. Verified end-to-end:
- Install: iot_base + iot + fusion_plating_iot all 'installed'
- Smoke test: in-spec → out-of-spec → hold raised (HOLD-0010);
  continued excursion → NO duplicate hold; back-in-spec → NEW
  excursion → NEW hold (HOLD-0011) ✓
- HTTP endpoint: correct token → 200 accepted; wrong token → 401;
  unknown device_serial → 404; batch payload → 200 accepted=N ✓

Phase B (when Raspberry Pi hardware arrives): DS18B20 iot_handler
driver for the Pi-side iot_drivers proxy + systemd service on
vanilla Raspberry Pi OS + first live reading from physical probe.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

fusion_iot/iot/tests/test_ingenico_driver.py

@@ -0,0 +1,101 @@
+from unittest.mock import MagicMock, patch
+from zlib import crc32
+
+from odoo.tests.common import BaseCase
+from odoo.tools import file_open
+
+
+class MockSocket:
+    def __init__(self, f):
+        self.f = f
+
+    def recv(self, num_bytes):
+        return self.f.read(num_bytes)
+
+
+class TestIncomingTransactionResponse(BaseCase):
+    @patch.dict(
+        "sys.modules", {
+            # Mock out all of iot_drivers to avoid side-effects from starting services,
+            # additional dependencies and modifying global imports
+            "odoo.addons.iot_drivers": MagicMock(),
+            # Mock the modules IngenicoDriver imports so the imports don't fail
+            "odoo.addons.iot_drivers.driver": MagicMock(),
+            "odoo.addons.iot_drivers.event_manager": MagicMock(),
+            "odoo.addons.iot_drivers.iot_handlers.interfaces.SocketInterface": MagicMock(),
+        }
+    )
+    def setUp(self):
+        # pylint: disable=import-outside-toplevel
+        from odoo.addons.iot.iot_handlers.drivers.IngenicoDriver import IncomingIngenicoMessage
+        self.IncomingIngenicoMessage = IncomingIngenicoMessage
+
+    def test_parse_ticketdata(self):
+        # The file contains the payload of a TLV message. To view or modify its
+        # contents, use a hex editor and the TLV Cash Register Interface specification
+        # to interpret it. Most of the data has been anonymized.
+        with file_open('iot/tests/data/TransactionResponse', 'rb') as f:
+            dev = MockSocket(f)
+            msg = self.IncomingIngenicoMessage(dev)
+            ticket_data = msg.getTransactionTicket()
+
+            # First expected string in the ticket data
+            assert b'KOPIE' in ticket_data
+            # Last expected string in the ticket data
+            assert b'Chip' in ticket_data
+
+
+class TestOutgoingIngenicoMessage(BaseCase):
+    @patch.dict(
+        "sys.modules", {
+            # Mock out all of iot_drivers to avoid side-effects from starting services,
+            # additional dependencies and modifying global imports
+            "odoo.addons.iot_drivers": MagicMock(),
+            # Mock the modules IngenicoDriver imports so the imports don't fail
+            "odoo.addons.iot_drivers.driver": MagicMock(),
+            "odoo.addons.iot_drivers.event_manager": MagicMock(),
+            "odoo.addons.iot_drivers.iot_handlers.interfaces.SocketInterface": MagicMock(),
+        }
+    )
+    def setUp(self):
+        # pylint: disable=import-outside-toplevel
+        from odoo.addons.iot.iot_handlers.drivers.IngenicoDriver import OutgoingIngenicoMessage
+
+        self.OutgoingIngenicoMessage = OutgoingIngenicoMessage
+        self.dev = MagicMock()
+        self.msg = self.OutgoingIngenicoMessage(
+            dev=self.dev,
+            terminalId=b"1",
+            ecrId="1",
+            protocolId=b"1",
+            messageType="TransactionRequest",
+            sequence=b"1",
+            transactionId=1,
+            amount=1,
+        )
+
+    def test_mdc_tag_length(self):
+        # 1 byte for the tag + 1 byte for the length + 4 bytes for the CRC
+        self.assertEqual(len(self.msg._generateMDC(b"dummy")), 6)
+
+    def test_unpadded_crc(self):
+        content = bytes(11)
+
+        # An even length CRC (in nibbles), which doesn't require padding
+        crc = format(crc32(content), 'x')
+        self.assertEqual(crc, '6b87b1ec')
+        self.assertEqual(len(crc), 8)
+
+        # Verify the CRC has the expected length and no errors are thrown
+        self.assertEqual(len(self.msg._getCRC32(content)), 4)
+
+    def test_padded_crc(self):
+        content = bytes(13)
+
+        # An odd length CRC (in nibbles), which does require padding
+        crc = format(crc32(content), 'x')
+        self.assertEqual(crc, 'f744682')
+        self.assertEqual(len(crc), 7)
+
+        # Verify the CRC has the expected length and no errors are thrown
+        self.assertEqual(len(self.msg._getCRC32(content)), 4)