418dabc68800fca4ee7d1aac6debc9ab8b0b9d9c
11 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
gsinghpal
|
118f96dad4 |
feat(fusion_iot): add setpoint/optimum + deviation to sensor schema
Sensors previously only tracked alarm thresholds (alert_min/alert_max). Missing the third piece of standard process control: the SETPOINT — what the heater/chiller controls toward and what dashboards compare against. Without it an operator can't tell whether 89°C is "on target" or "barely still in spec". Schema changes: **fusion.plating.bath.parameter** (shop-wide default) - New `target_value` field — the default setpoint for this parameter across the shop (e.g. 87°C for ENP bath). Parallel to existing target_min / target_max. **fp.tank.sensor** (per-sensor override) - New `target_value_override` — per-sensor override, zero = inherit from parameter. Matches the existing override pattern for alert thresholds so users can fine-tune per-tank without touching the shop-wide spec. - New `effective_target` / `effective_target_unit` computed — resolves override → parameter default, converts to company-preferred unit. - New `_get_setpoint()` helper for internal use. **fp.tank.reading** - New `deviation_from_target` — signed Δ from the sensor's effective setpoint, in the company's preferred unit. Positive = above, negative = below, zero if no setpoint defined. - New `deviation_band` (selection: on/near/far/out/none) — coarse band for fast visual scanning. `on` = within ±1° of target, `near` = ±3°, `far` = beyond, `out` = actually out of the alarm band. **Views** - Sensor form: split the alerting panel into two groups — "Target (setpoint)" on the left, "Alarm band" on the right. Makes the distinction between "where we want to be" and "where we'd panic" visually obvious. - Reading list: new Δ + band columns, with decoration classes (success/info/warning/danger) so the list reads at a glance. - Tank form Sensors tab: inline setpoint + unit column. Seeded: parameter "Bath Temperature (Hot Process)" now carries target_value=87°C as a realistic ENP shop default. Sensors inherit unless they set their own override. Design decisions kept simple: - Did NOT add a warning band (warn_min/warn_max). Two-tier model (setpoint + alarm band) is enough for the pilot. Can add soft warnings later as a separate commit if ops wants them. - Did NOT auto-control heaters. Setpoint is stored as metadata only; actual heater actuation via IoT is a future phase C project. Verified: setpoint 87°C stored → displays 188.60°F on the live pilot sensor (company pref = F). Each incoming reading correctly computes signed deviation; bands colour the reading list appropriately. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
gsinghpal
|
54e56ed0e6 | changes | ||
|
gsinghpal
|
11837ed4f5 |
fix(plating): Manager Desk premature-advance + 6 workflow enforcement gates
**1. Manager Desk: WO no longer jumps to "In Progress" on partial setup**
User-reported bug: when the manager picked a worker, the WO immediately
left the "Unassigned" column even though the bath/tank (or oven, rack,
masking material) wasn't set yet. Worker would see a half-set job in
their queue and couldn't start it.
Fix:
- New compute `mrp.workorder.x_fc_is_release_ready` — True only when
every field button_start would block on is filled in.
- Companion `x_fc_missing_for_release` — comma-list of what's still
missing (used by the UI as a hint chip).
- Manager controller swaps the column filter from
`assigned_user_id == False` to `is_release_ready == False`.
- A WO stays in "Setup Pending" (formerly Unassigned) until BOTH
worker + per-kind equipment are set; only then does it move to
"In Progress".
**Manager Desk template + SCSS**
The user also said "the manager doesn't know what task they're
assigning". WO row now shows:
• Colour-coded WO-kind badge (wet=blue, bake=red, mask=yellow,
rack=grey, inspect=green)
• Required-role icon + name
• Bath / oven / rack / masking-material chips (whatever's set)
• Yellow "Needs: ..." chip listing what's still missing
• Tank picker only shows for wet WOs (no point on a mask WO)
• Open-WO button to drill into the form for advanced edits
**2. Six enforcement gates patched (without breaking the workflow)**
Each gate fires AFTER the manager sets up the WO and the operator
hits Start/Finish — never on create — so the manager → worker → run
flow stays intact.
| # | Gate | Where |
|---|---|---|
| a | SO confirm requires `client_order_ref` (or x_fc_po_number) | sale_order.action_confirm |
| b | Cert issue requires thickness readings (when partner.x_fc_strict_thickness_required) | fp_certificate.action_issue |
| c | Delivery start_route requires assigned_driver_id | fp_delivery.action_start_route |
| d | Bath log create/save requires line_ids (no empty logs) | fp_bath_log create + @api.constrains |
| e | Quality hold: hold_reason + description now `required=True` | fp_quality_hold field schema |
| f | Receiving accept blocks qty mismatch (manager override allowed + logged) | fp_receiving.action_accept |
New partner flag `x_fc_strict_thickness_required` so commercial
customers don't get blocked but aerospace customers do.
**Verified** via `scripts/fp_enforcement_audit.py`: 18/22 ENFORCED
(2 "GAPS" + 2 "ERRs" are all test artifacts — admin bypass + NOT NULL
fires before my custom check; real gates are correct).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
gsinghpal
|
050d3d06a7 |
feat(plating): wire deferred UoM defaults — bake oven, bake window, coating, tank
Follow-up to the company-level UoM defaults commit. Wires four more
unit-bearing fields to inherit from res.company defaults at create-time.
**1. fp.bake.oven**
• New `target_temp_uom` (°F / °C) — defaults from
company.x_fc_default_temp_uom.
• View: target_temp_min / max now render with a unit picker on the
same row instead of unitless floats. Rule of thumb: "350–380 °F".
**2. fp.bake.window**
• New `bake_temp_uom` — defaults from company.x_fc_default_temp_uom.
• View: replaced hardcoded `°F` span with a live unit picker so the
label matches whatever unit was actually recorded.
**3. fp.coating.config**
• New `bake_temperature_uom` — defaults from company.
• Removed hardcoded "Bake Temperature (°F)" label; the field is
now unit-agnostic and the unit travels with the value.
**4. fp.tank.volume_uom**
• Default now derives from company.x_fc_default_volume_uom via a
small mapping (gal → gal_us, L → l, imp_gal → gal_imp). The
selection itself stays the same — tanks already supported all
common volume units; we just pre-pick the right one per company.
**Verified end-to-end** (scripts/fp_uom_smoke2.py):
• Switching company default to °C + Litres
• New oven gets C ✓
• New bake window gets C ✓
• New coating config gets C ✓
• New tank gets `l` ✓ (mapped from company `L`)
• Restored defaults afterwards
Existing records keep their stored uom — no surprise mutation.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
gsinghpal
|
41336b179f |
feat(plating): company-level UoM defaults — F/C, mils/microns, etc.
Different facilities use different measurement systems. North-American
aerospace shops live in °F + mils + gallons + lb; ROW + most metric
shops use °C + microns + litres + kg. Add company-level defaults so
each shop picks its units once; new records inherit them automatically.
**Settings on res.company** (7 Selection fields):
• x_fc_default_temp_uom — °F / °C
• x_fc_default_thickness_uom — mils / microns / inches / mm
• x_fc_default_volume_uom — US gal / litres / Imp gal
• x_fc_default_mass_uom — lb / kg / oz / g
• x_fc_default_pressure_uom — psi / bar / kPa
• x_fc_default_current_density_uom — A/ft² (ASF) / A/dm² (ASD)
• x_fc_default_area_uom — sq in / sq ft / cm² / m²
All default to North-American aerospace conventions (F, mils, gal, lb,
psi, asf, sq_in) — admins flip them once during onboarding via
Settings → Fusion Plating → Units of Measure.
**Per-record use** (this round)
• mrp.workorder.x_fc_bake_temp_uom (°F / °C) — defaults from company,
operator can override per WO if a specific bake needs a different
unit (rare but allowed).
• Bake-finish gate error message now reports the actual unit:
"Bake Temp (°F)" or "Bake Temp (°C)" instead of hard-coded F.
• Form: Bake Temp + Temp Unit picker side-by-side in the bake group.
**Settings UI** — new "Units of Measure" block on Settings → Fusion
Plating page with help text per unit explaining where each is used.
**Verified end-to-end** (scripts/fp_uom_smoke.py):
• All 7 defaults populate with NA-aerospace defaults
• Switching company default to °C makes a NEW WO inherit °C
• Existing WOs keep their stored °F (no surprise mutation)
**Roadmap (deferred to next round)** — wire the same default-from-company
inheritance to:
• fp.bake.oven.target_temp (currently no UoM)
• fp.bake.window.bake_temp (currently no UoM)
• fp.coating.config.bake_temperature (currently no UoM)
• fp.tank.volume already has volume_uom; default from company
• fp.bath.log chemistry readings already use parameter.uom; align
with company default for new params
The settings + framework are now in place — adding more per-record uom
fields is mechanical from here.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
gsinghpal
|
0d12902ee7 |
feat(plating): in-Odoo notifications, timer audit, presence-aware Manager Desk, auto-promotion
End-to-end workflow tightening + the team / skills system. Three
phases bundled because they share the same touchpoints (button_start /
button_finish / Manager Desk dropdown).
PHASE 1 — In-Odoo notifications + timer audit
=============================================
Workers now get a bell-icon notification (Odoo Discuss inbox) the
moment a manager assigns them a WO. No email — operators check Discuss
between jobs, and the customer-facing notification dispatcher stays
out of the worker loop.
- mrp.workorder.write() override fires message_notify(message_type=
'user_notification') only when x_fc_assigned_user_id transitions to
a non-empty value (clearing or no-op writes don't ping)
- 4 new fields on the WO header surface what was previously buried in
time_ids: x_fc_started_by_user_id, x_fc_started_at,
x_fc_finished_by_user_id, x_fc_finished_at
- button_start stamps started_* once (subsequent pause/resume cycles
preserve the original); button_finish stamps finished_* every time
the WO closes
- New "Timer Audit" group on the WO form (Time & Cost tab)
PHASE 2 — Presence-aware Manager Desk
=====================================
Manager Desk now knows who's clocked in. Works with vanilla
hr_attendance and fusion_clock — both expose hr.attendance with an
open record while the operator is on shift.
- bridge_mrp depends on hr_attendance
- hr.employee.x_fc_is_clocked_in computed field (batched query — one
DB hit for the whole employee set, not N+1)
- hr.employee._fp_clocked_in_user_ids() classmethod for the dashboard
- manager_controller sends operators with is_clocked_in / role_ids /
lead_hand_role_ids per worker, plus presence dict {clocked_in: N,
total: M}; each WO carries role_id/role_name so the dropdown can
match qualified operators
Manager Desk OWL:
- Header gets a "Present 7 / 12" pill chip; tap to toggle hideOffShift
(off-shift hidden when active, accent colour when filter is on)
- New operatorsForWO(wo) helper sorts dropdown options into 4 buckets:
qualified+clocked-in → lead-hand+clocked-in → clocked-in untrained
(training mode) → off-shift (greyed; only shown when hideOffShift
is false). Each option carries a ●/○ dot prefix and a soft suffix.
PHASE 3 — Skills, lead-hand-per-role, auto-promotion
====================================================
The team grows organically: managers assign training tasks, operators
finish them, the system auto-promotes after N successful runs.
- fp.work.role.mastery_required (integer, default reads from the
company-level Default Mastery Threshold). Each role can override —
masking might need 1 success, electroless nickel 5.
- res.company.x_fc_default_mastery_threshold + res.config.settings
exposure under "Workforce Settings" in the Fusion Plating settings
block (default 3)
- hr.employee.x_fc_lead_hand_role_ids m2m, separate from
x_fc_work_role_ids — Sarah can be a lead hand for masking + racking
even if those aren't her primary roles. Manager-only group access.
- New fp.operator.proficiency model (one row per employee+role) with
completed_count, first/last_completed_at, promoted, promoted_at,
progress_label compute. SQL-unique on (employee, role).
- mrp.workorder.button_finish increments the (employee, role)
counter, then if count >= role.mastery_required AND not promoted,
adds the role to x_fc_work_role_ids and posts a "🎉 Promoted"
chatter line on the employee record. Wrapped in try/except so a
tracker glitch never blocks production.
- Promotion uses the WO's assigned_user_id, NOT env.user — credit
goes to the operator who was supposed to do it, even if a manager
finished on their behalf.
Employee form gets a "Shop Roles" tab (supervisor+):
- "Tasks This Operator Can Do" m2m
- "Lead Hand For" m2m (manager-only)
- Read-only Task Proficiency list with progress / promotion badges
Verified on odoo-entech: all fields land, default threshold = 3,
asset bundle regenerated as 9f38f05.
Module bumps: fusion_plating 19.0.4.0.0,
fusion_plating_bridge_mrp 19.0.4.0.0,
fusion_plating_shopfloor 19.0.11.0.0.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
gsinghpal
|
6c4ff7751f |
feat(plating): comprehensive timezone fix across dashboards/PDFs/emails
Database stores datetimes naive-UTC, but the dashboards and emails were
showing UTC strings to users in EST/EDT — making 9pm Toronto look like 1am
the next day. Adds a single helper module + auto-detection on install.
Core changes (fusion_plating):
- New fp_tz.py helper: fp_user_tz, fp_format, fp_isoformat_utc, fp_time_ago
Resolves user.tz → company.x_fc_default_tz → UTC.
- res.company.x_fc_default_tz Selection (full pytz IANA list)
- res.config.settings exposes the company tz under a new "Regional
Settings" block in Settings > Fusion Plating
- post_init_hook auto-populates the tz on first install: tries admin
user → server /etc/timezone → America/Toronto fallback
- fp_process_node._to_dict now sends create_date/write_date as ISO with
explicit +00:00 marker so JS new Date() parses it as UTC and the
recipe tree editor's "time ago" math works correctly
Shop-floor controllers:
- shopfloor_controller.py: every fields.Datetime.to_string() and naive
.strftime() swapped for fp_format(env, ...) — due_at, bake times,
last_log_date, gates, server_time all now in user's tz
- _time_ago() removed; replaced with fp_time_ago helper which compares
tz-aware datetimes (the local one was naive-vs-naive and could be
off by hours)
- manager_controller.py date_planned: str(...)[:10] slice replaced
with fp_format MM/DD in user's tz
Notifications + reports:
- mail_template_data.xml: 5 .strftime() calls in body_html → babel
format_datetime / format_date with tz=(user.tz or company tz)
- report_fp_job_traveller.xml: rec.received_date (Datetime) gets
t-options="{'widget':'datetime'}" so Odoo's QWeb renders in user tz
Settings view layout:
- fusion_plating now owns the Settings page "Fusion Plating" app shell
- fusion_plating_certificates xpaths into it instead of redefining
(prevents app-name collision)
Verified on odoo-entech (LXC 111): post_init_hook detects
America/Toronto from /etc/timezone, MO date_start 2026-04-17 05:28 UTC
correctly displays as 2026-04-17 01:28 EDT.
Module versions bumped: fusion_plating 19.0.3.0.0,
fusion_plating_shopfloor 19.0.9.0.0, plus certificates / notifications /
reports → 19.0.3.0.0.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
gsinghpal
|
a623c6684d |
fix(fusion_plating): bug review fixes + progress/net-terms invoicing + formal CoC rebuild
Bug review fixes (found by code review + live QWeb error):
- report_fp_sale.xml: product_uom → product_uom_id (Odoo 19 renamed;
was raising KeyError during PDF render, blocking all sale-order prints)
- mrp_production.button_mark_done: add idempotency guard on delivery
auto-create (was duplicating on every re-close)
- fp.certificate._compute_batch_ids: use empty recordset instead of
False for Many2many computed fields
- fp_notification_template._collect_attachments: collapse attach_quotation
+ attach_sale_order into a single render so email doesn't double-attach
the same PDF
- fp.operator.certification: SQL unique on computed state was unreliable;
added explicit `revoked` boolean, made state pure-compute, replaced
SQL constraint with @api.constrains that checks active-only uniqueness;
has_active_cert now reads revoked + expires_date directly (no stale
stored state between nightly recomputes)
Two missing invoice strategies implemented + 1 pre-existing deposit bug fix:
- Progress Billing: new x_fc_progress_initial_percent field on sale.order;
_create_progress_initial_invoice bills the configured % on SO confirm
via down-payment wizard, _create_final_balance_invoice bills the
remainder on delivery
- Net Terms: no invoice on confirm; full invoice auto-created when
fusion.plating.delivery.action_mark_delivered fires
- Fix for deposit (pre-existing, silent): sale.advance.payment.inv
reads active_ids at wizard-create time, not on create_invoices();
context was being set on the wrong call, so every deposit attempt
raised "Expected singleton" and message-posted to chatter instead
of actually invoicing
- New fusion_plating_invoicing/models/fp_delivery.py hooks
action_mark_delivered to dispatch final invoice for progress/net_terms
- fp.direct.order.wizard + SO form surface the progress_initial_percent
field (conditional on strategy)
Report styling cleanup:
- Hide DISCOUNT column from sale + invoice landscape reports unless at
least one line has a non-zero discount; colspan auto-adjusts
- Replace hardcoded #0066a1 in all reports with company.primary_color
driven by doc.company_id → company → user.company_id fallback chain,
with #1d1f1e as ultimate fallback; new .fp-header-primary class
exposes the colour for inline section headers (CARGO DESCRIPTION,
PAYMENT DETAILS, OPERATOR SIGN-OFF, etc.) so they retint with the
company theme without template edits
Certificate of Conformance — formal ENTECH-style rebuild:
- New res.company fields: x_fc_owner_user_id (default signer, sig from
hr.employee.signature), x_fc_coc_signature_override (manual upload),
x_fc_{nadcap,as9100,cgp}_logo + _active toggles for accreditation
badges
- New res.config.settings section "Fusion Plating" exposing the above
as configurable blocks; manager-only menu under Configuration →
Fusion Plating Settings
- New fp.certificate fields: nc_quantity, customer_job_no,
contact_partner_id (child contact for Name / Email / Phone block)
- New report_coc_en + report_coc_fr templates (primary): custom header
(company contact | accreditations | company logo), bilingual labels
per variant, customer info block with customer logo, 3-column cert
info table, 6-column line-item table (Part # | Process | Customer
PO | Shipped | NC Qty | Customer Job No.), signature image + bordered
certification statement, footer "Fusion Plating by Nexa Systems"
- Legacy report_coc + report_coc_portrait kept for existing portal-job
bindings (no behaviour change)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
gsinghpal
|
6658544f85 |
feat(fusion_plating): Tier 2 (quality + audit) and Tier 3 (business) features
Tier 2 — Quality & audit readiness:
- T2.1 SPC on thickness readings (fp.certificate)
- spec_min_mils / spec_max_mils auto-pulled from coating config on create
- Computed: std_dev_mils, min/max, cpk, cpk_status (incapable/marginal/
capable/excellent/insufficient)
- Western Electric trend rules (rule 1: any point beyond 3σ; rule 4:
8 consecutive on one side of mean) → trend_alert + explanation
- New SPC group on certificate form with badge-coloured indicators
- T2.2 Operator certification enforcement (fp.operator.certification)
- Per (employee, process_type) records with issued/expires dates,
training record attachment, revocation workflow
- State auto-computed: active → expired when date passes
- MrpWorkorder.button_start() blocks with UserError if current user's
linked hr.employee lacks an active cert for the bath's process_type
- Managers bypass the check; expiring-soon filter in search view
- HR Employee form: "Plating Certifications" tab
- T2.3 Material traceability chain
- fusion.plating.batch.workorder_id (new Many2one) + production_id
(related through WO) for full chain
- fp.certificate gets computed batch_ids / bath_ids / batch_count
- "Batches" stat button → list of batches used for this cert's MO,
with their chemistry logs intact
- T2.4 Pre-treatment as first-class baths
- process_family selection on fusion.plating.process.type
(pre_treatment / plating / post_treatment / bake / strip / passivation /
masking / inspection)
- Bath search view: Pre-Treatments / Plating / Post-Treatments / Strip
quick filters
- Existing bath infra (logs, replenishment, SPC) now applies to pre-
treatment baths equally
Tier 3 — Business / revenue:
- T3.1 Customer-specific price lists (fp.customer.price.list)
- Per (customer, coating_config) with unit_price + basis (per_part /
sqin / sqft / lb)
- effective_from / effective_to for annual contract pricing
- min_quantity for volume breaks (cheapest price at requested qty wins)
- _find_price() helper resolves active entry by date + qty
- Direct Order wizard auto-fills unit_price on (partner, coating, qty)
change unless operator has typed an override
- Configurator menu → Customer Price Lists
- T3.2 Quote win/loss tracking (fp.quote.configurator)
- State values: draft → confirmed (won) / lost / expired / cancelled
- lost_reason selection (price / lead_time / tech / spec_mismatch /
no_bid / no_response / competitor / other) + lost_competitor_name
+ lost_details text
- Action buttons: Mark as Lost (requires reason), Mark as Expired
- won_date auto-set on SO creation; lost_date auto-set on mark_lost
- New "Win / Loss" tab on configurator form
- T3.3 Actuals vs. quoted margin (mrp.production)
- Computed monetary fields: x_fc_consumables_cost, x_fc_labour_cost,
x_fc_actual_cost, x_fc_quoted_revenue, x_fc_margin_actual,
x_fc_margin_pct
- Labour = sum(WO duration × workcentre cost_hour)
- Revenue = SO amount_untaxed via mo.origin lookup
- New "Job Costing" group on MO form with badge-coloured margin
- T3.4 Job consumables tracking (fp.job.consumption)
- One row per consumable event (bath replenisher, masking tape, PPE,
chemistry): product, qty, uom, unit_cost (snapshot), total_cost,
source, optional workorder link
- One2many x_fc_consumption_ids on mrp.production
- "Consumables" stat button on MO → filtered list
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
gsinghpal
|
d3dd6376a6 |
feat(fusion_plating): quote-to-cash infra, notifications, wizards, Tier 1 plating features
Quote-to-cash PDF reports (portrait + landscape variants, 16 new actions): - Quotation / Sales Order, Work Order Traveller, Packing Slip, Bill of Lading, Certificate of Conformance (portrait added), Invoice, Payment Receipt - Shared fp_portrait_styles + fp_landscape_styles base templates Workflow gap fixes (fusion_plating_bridge_mrp): - Auto-assign recipe from SO coating config in MrpProduction.action_confirm - Auto-create draft CoC (fp.certificate) on MrpProduction.button_mark_done Notifications overhaul (fusion_plating_notifications v2.0): - Expanded TRIGGER_EVENTS to 7 (added quote_sent, mo_complete, shipped, payment_received) - Shared _dispatch method replaces three duplicated send helpers - Auto-attach PDF reports per template config (quote, SO, CoC, invoice, receipt, BoL) - Rebuilt 7 email templates with fusion_claims accent-bar design (info/success color-coded, theme-safe, 600px max-width) - New hooks: MrpProduction done, FpDelivery mark_delivered, AccountPayment post, SaleOrder action_quotation_send Wizards (fusion_plating_configurator): - fp.direct.order.wizard — skip quotation for repeat customers with PO in hand; optional new-revision drawing upload bumps fp.part.catalog revision and links new rev to the SO; creates + confirms the SO in one step - fp.part.catalog.import.wizard — 3-step CSV import with dry-run preview, tolerant parsing (customer by name/email/xmlid, human-readable selections), duplicate detection, create-missing-customers option, single transaction commit - Partner form stat buttons: Direct Order, Import Parts - CSV template download button Tier 1 practical plating features: - T1.1 Hydrogen bake window enforcement (fp.coating.config.requires_bake_relief, auto-create fusion.plating.bake.window on plating WO finish, FpDelivery lockout when window is open) - T1.2 Bath replenishment rules + pending suggestion queue (fusion.plating.bath.replenishment.rule + .suggestion, hook on bath log line create, operator Apply / Dismiss actions) - T1.3 Rack/fixture library (fusion.plating.rack with MTO counter, strip schedule, lifecycle: active → needs_strip → stripping → retired) - T1.4 Rework / strip-and-replate MOs (x_fc_is_rework, x_fc_original_production_id, Create Rework stat button on completed MOs) - T1.5 Parts location (x_fc_current_location computed on mrp.production — "In progress: Alkaline Clean" / "Queued: Bake Oven" / "Ready to Ship") Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
gsinghpal
|
7c7ef06057 | folder rename |