Fusion Plating Main — CSA N299 Level 1 Program Rev D — 2025-09-15 active

Primary nuclear quality program covering OPG and Bruce Power plating work. NQA-1 awareness maintained for potential US utility contracts. Last customer audit by OPG — zero findings.

ITP-NUC-2026-001 P/N 9920-A DWG-NUC-9920-A Rev 3 approved

HP-1: Pre-plate dimensional verification — customer witness required.
HP-2: Post-plate thickness measurement — customer hold point, work stops until released.
WP-1: Bath chemistry verification — customer may witness.

Thickness: XRF per ASTM B568. Adhesion: bend test per ASTM B571. Porosity: ferroxyl test per ASTM B733. Hardness: microhardness per ASTM E384.

EN deposit 0.0010" +/- 0.0002". Hardness 48-52 HRC after heat treat. Zero porosity on ferroxyl. 100% adhesion on bend test.

ITP-NUC-2026-002 P/N 8815-B DWG-NUC-8815-B Rev 1 draft

HP-1: Pre-plate surface preparation verification.
RP-1: Post-plate records review by customer QA.

Thickness: magnetic gauge per ASTM B499. Adhesion: tape test per ASTM D3359.

NUC-PED-2026-001 P/N 9920-A LOT-NUC-44219 CMTR-8821, CMTR-8822 HT-20250712-A CHEM-2026-0091, CHEM-2026-0092

Thickness: 0.0011" (spec 0.0010" +/- 0.0002") — PASS.
Hardness: 50 HRC (spec 48-52 HRC) — PASS.
Adhesion: No separation on bend test — PASS.
Porosity: No indication on ferroxyl — PASS.