Incoming Inspection (Standard) RECV_STD fa-inbox Verify quantity received against packing slip. Visually inspect for damage, corrosion, oil residue. Photo any damage. Record inspector initials.

]]> Electroclean (Standard) ELEC_CLEAN_STD fa-bolt Submerge rack and energise. Record actual amperage, voltage, and current density. Verify polarity per recipe spec.

]]> Wood's Nickel Strike (Standard) STRIKE_STD fa-flash Apply thin nickel strike to ensure adhesion before main plate. Record bath ID, time, temperature, electrical readings.

]]> Salt Spray Test (ASTM B117) SALT_SPRAY_STD fa-tint Submit test panel to salt spray cabinet for the specified duration. Record red rust % and white corrosion %. Attach lab report on completion.

]]> Adhesion Test (Bend / Tape) ADHESION_STD fa-link Perform adhesion test per spec (bend, tape, burnish, or file). Photo coupon. Record PASS/FAIL.

]]> Microhardness Test HARDNESS_STD fa-cube Take three indentations minimum on the test coupon. Record test load, individual readings, and the computed average. Confirm equipment calibration is current.

]]> Packaging (Standard) PKG_STD fa-archive Wrap parts per customer spec (VCI bag, bubble wrap, separator paper). Verify cert package included if required. Record quantity per package and total package count.

]]> Tank Replenishment REPL_STD fa-flask Mid-shift bath top-up. Record bath ID, chemistry added (name and amount), pH and concentration before/after. Operator must sign.

]]> Hot Water Porosity Test (A-15) HWP_A15 fa-tint Hot-water porosity test for plated samples. Verify continuity of the deposit across the test panel; record any porosity sites and attach a photo when a defect is found.

]]> Final Inspection / Packaging FINAL_PKG_STD fa-check-circle Combined final visual + dimensional inspection followed by packaging into the customer's original boxes for shipment. Verify part count, attach certs, photo the sealed load.

]]>