19a49acba0
Phase B kickoff — Pi hardware is wired up and posting readings to Odoo via /fp/iot/ingest every 30 seconds. No more simulations; this is real tank-temperature data. New files: - `pi/fp_iot_poller.py` — tiny systemd daemon. Reads every DS18B20 under /sys/bus/w1/devices/28-* (kernel CRC-validated) and POSTs a batch to /fp/iot/ingest with the shared-secret token. Handles transient network failures by logging + retrying on the next 30-second tick. Config in /etc/fp-iot/poller.conf (ODOO_URL, INGEST_TOKEN, INTERVAL_SECONDS). - `pi/fp-iot-poller.service` — systemd unit with hardened sandbox (NoNewPrivileges, ProtectSystem=strict, ProtectHome, PrivateTmp, ReadOnlyPaths=/sys/bus/w1 /etc/fp-iot). Auto-starts on boot, restarts on failure. - `scripts/fp_iot_setup_live_sensor.py` — one-shot entech initialiser: rotates the ingest token to a real random secret, picks a test tank + temperature parameter, creates the fp.tank.sensor record for serial 28-000000b276e4 with 15-35°C alert thresholds sized for bench testing. Verified end-to-end: Pi reads probe → posts to Odoo → reading lands in fp.tank.reading within 1s. 5 consecutive readings at 30s cadence show smooth temperature trend (probe cooling from 27.25°C to 26.06°C after being handled). in_spec flag correct, sensor cache (last_reading_value / _at / _in_spec) updates on every reading. Not yet done — Phase B continued: - Repackaged iot_drivers path (full Odoo IoT integration vs this simple HTTP path) — this poller is the minimal viable pilot. - Multi-probe (scalable to N probes per Pi; code already supports, just need more hardware). - Graduate to the proper iot.device + iot.box Odoo registration flow. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
26 lines
605 B
Desktop File
26 lines
605 B
Desktop File
[Unit]
|
|
Description=Fusion Plating IoT — DS18B20 poller
|
|
After=network-online.target
|
|
Wants=network-online.target
|
|
|
|
[Service]
|
|
Type=simple
|
|
ExecStart=/usr/bin/python3 /usr/local/bin/fp_iot_poller.py
|
|
Restart=on-failure
|
|
RestartSec=5
|
|
User=fp
|
|
Group=fp
|
|
# Poller only needs read access to /sys/bus/w1 + /etc/fp-iot; everything
|
|
# else locked down.
|
|
NoNewPrivileges=true
|
|
ProtectSystem=strict
|
|
ProtectHome=true
|
|
PrivateTmp=true
|
|
ReadOnlyPaths=/sys/bus/w1 /etc/fp-iot
|
|
# Journal-only logging — use `journalctl -u fp-iot-poller -f` to tail
|
|
StandardOutput=journal
|
|
StandardError=journal
|
|
|
|
[Install]
|
|
WantedBy=multi-user.target
|