118f96dad4
Sensors previously only tracked alarm thresholds (alert_min/alert_max). Missing the third piece of standard process control: the SETPOINT — what the heater/chiller controls toward and what dashboards compare against. Without it an operator can't tell whether 89°C is "on target" or "barely still in spec". Schema changes: **fusion.plating.bath.parameter** (shop-wide default) - New `target_value` field — the default setpoint for this parameter across the shop (e.g. 87°C for ENP bath). Parallel to existing target_min / target_max. **fp.tank.sensor** (per-sensor override) - New `target_value_override` — per-sensor override, zero = inherit from parameter. Matches the existing override pattern for alert thresholds so users can fine-tune per-tank without touching the shop-wide spec. - New `effective_target` / `effective_target_unit` computed — resolves override → parameter default, converts to company-preferred unit. - New `_get_setpoint()` helper for internal use. **fp.tank.reading** - New `deviation_from_target` — signed Δ from the sensor's effective setpoint, in the company's preferred unit. Positive = above, negative = below, zero if no setpoint defined. - New `deviation_band` (selection: on/near/far/out/none) — coarse band for fast visual scanning. `on` = within ±1° of target, `near` = ±3°, `far` = beyond, `out` = actually out of the alarm band. **Views** - Sensor form: split the alerting panel into two groups — "Target (setpoint)" on the left, "Alarm band" on the right. Makes the distinction between "where we want to be" and "where we'd panic" visually obvious. - Reading list: new Δ + band columns, with decoration classes (success/info/warning/danger) so the list reads at a glance. - Tank form Sensors tab: inline setpoint + unit column. Seeded: parameter "Bath Temperature (Hot Process)" now carries target_value=87°C as a realistic ENP shop default. Sensors inherit unless they set their own override. Design decisions kept simple: - Did NOT add a warning band (warn_min/warn_max). Two-tier model (setpoint + alarm band) is enough for the pilot. Can add soft warnings later as a separate commit if ops wants them. - Did NOT auto-control heaters. Setpoint is stored as metadata only; actual heater actuation via IoT is a future phase C project. Verified: setpoint 87°C stored → displays 188.60°F on the live pilot sensor (company pref = F). Each incoming reading correctly computes signed deviation; bands colour the reading list appropriately. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
124 lines
4.7 KiB
Python
124 lines
4.7 KiB
Python
# -*- coding: utf-8 -*-
|
|
# Copyright 2026 Nexa Systems Inc.
|
|
# License OPL-1 (Odoo Proprietary License v1.0)
|
|
# Part of the Fusion Plating product family.
|
|
|
|
{
|
|
'name': 'Fusion Plating',
|
|
'version': '19.0.5.5.0',
|
|
'category': 'Manufacturing/Plating',
|
|
'summary': 'Core plating / metal finishing ERP: facilities, processes, tanks, baths, jobs, operators.',
|
|
'description': """
|
|
Fusion Plating — Core
|
|
=====================
|
|
|
|
Part of the Fusion Plating product family by Nexa Systems Inc.
|
|
|
|
Fusion Plating is a configurable, multi-tenant capable ERP for plating and metal
|
|
finishing shops. This core module provides the process-agnostic foundation that
|
|
every shop needs regardless of size, process mix, jurisdiction, or industry.
|
|
|
|
The core ships intentionally empty of region-specific or process-specific
|
|
content — that comes from add-on modules:
|
|
|
|
* fusion_plating_process_en — Electroless nickel plating
|
|
* fusion_plating_process_chrome — Chrome coating (hex or trivalent)
|
|
* fusion_plating_process_anodize — Aluminum anodizing (Type II, III)
|
|
* fusion_plating_process_black_oxide — Black oxidizing
|
|
* fusion_plating_quality — QMS (NCR, CAPA, calibration, CoC, doc control)
|
|
* fusion_plating_compliance — Generic compliance framework
|
|
* fusion_plating_compliance_on — Ontario regulatory pack
|
|
* fusion_plating_compliance_tor — Toronto Ch. 681 municipal pack
|
|
* fusion_plating_safety — SDS, WHMIS/TDG training, JHSC, exposure
|
|
* fusion_plating_shopfloor — Tablet operator stations, QR scanning
|
|
* fusion_plating_portal — Customer portal
|
|
* fusion_plating_aerospace — AS9100 + Nadcap AC7108 pack
|
|
* fusion_plating_nuclear — CSA N299, CNSC, NQA-1 pack
|
|
* fusion_plating_cgp — Controlled Goods Program pack
|
|
* fusion_plating_logistics — Pickup & delivery
|
|
* fusion_plating_culture — Values / fundamentals framework
|
|
|
|
Core concepts
|
|
-------------
|
|
* Facility — a physical site with its own tanks, operators, compliance profile
|
|
* Process Type — extensible taxonomy of finishing processes
|
|
* Work Center — production line or station within a facility
|
|
* Tank — physical vessel with QR code and state
|
|
* Bath — the chemistry currently in a tank, with its own lifecycle
|
|
* Bath Log — daily chemistry readings with pass/fail vs target
|
|
* KPI — configurable headline metrics per shop
|
|
* Delegation Inbox — single pane of "things waiting for someone"
|
|
|
|
Design principles
|
|
-----------------
|
|
1. No client-specific strings in core.
|
|
2. No region-specific data in core.
|
|
3. No process-specific chemistry in core.
|
|
4. Works on both Odoo Community and Enterprise editions.
|
|
5. Theme-aware: respects user light/dark mode preference.
|
|
6. Multi-facility, multi-company, multi-currency capable.
|
|
|
|
Copyright (c) 2026 Nexa Systems Inc. All rights reserved.
|
|
""",
|
|
'author': 'Nexa Systems Inc.',
|
|
'website': 'https://www.nexasystems.ca',
|
|
'maintainer': 'Nexa Systems Inc.',
|
|
'support': 'support@nexasystems.ca',
|
|
'license': 'OPL-1',
|
|
'price': 0.00,
|
|
'currency': 'CAD',
|
|
'depends': [
|
|
'base',
|
|
'mail',
|
|
'contacts',
|
|
'product',
|
|
'stock',
|
|
'sale_management',
|
|
'purchase',
|
|
'hr',
|
|
'uom',
|
|
],
|
|
'data': [
|
|
'security/fp_security.xml',
|
|
'security/ir.model.access.csv',
|
|
'data/fp_sequence_data.xml',
|
|
'data/fp_process_category_data.xml',
|
|
'views/fp_process_type_views.xml',
|
|
'views/fp_work_center_views.xml',
|
|
'views/fp_tank_views.xml',
|
|
'views/fp_bath_log_views.xml',
|
|
'views/fp_facility_views.xml',
|
|
'views/fp_bath_views.xml',
|
|
'views/fp_process_node_views.xml',
|
|
'views/fp_rack_views.xml',
|
|
'views/fp_bath_replenishment_views.xml',
|
|
'views/fp_operator_certification_views.xml',
|
|
'views/res_config_settings_views.xml',
|
|
'views/fp_menu.xml',
|
|
'data/fp_recipe_enp_alum_basic.xml',
|
|
'data/fp_recipe_enp_steel_basic.xml',
|
|
'data/fp_recipe_enp_sp.xml',
|
|
'data/fp_recipe_general_processing.xml',
|
|
'data/fp_recipe_anodize.xml',
|
|
'data/fp_recipe_chem_conversion.xml',
|
|
],
|
|
'post_init_hook': 'post_init_hook',
|
|
'assets': {
|
|
'web.assets_backend': [
|
|
'fusion_plating/static/src/scss/fusion_plating.scss',
|
|
'fusion_plating/static/src/scss/recipe_tree_editor.scss',
|
|
'fusion_plating/static/src/scss/fp_chatter_dark.scss',
|
|
'fusion_plating/static/src/xml/recipe_tree_editor.xml',
|
|
'fusion_plating/static/src/js/recipe_tree_editor.js',
|
|
],
|
|
},
|
|
'demo': [
|
|
'data/fp_demo_data.xml',
|
|
'data/fp_demo_recipe_data.xml',
|
|
],
|
|
'images': ['static/description/icon.png'],
|
|
'installable': True,
|
|
'auto_install': False,
|
|
'application': True,
|
|
}
|