chore(shopfloor): register fp_rpc.js asset + bump to 19.0.30.2.0 (P6.3.6)

Adds the Phase 6.3 fpRpc wrapper to the web.assets_backend bundle.
Placed before its consumers so the `import { fpRpc } from "./services/fp_rpc"`
calls in job_workspace, shopfloor_landing, manager_dashboard, and
hold_composer resolve.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

fusion_plating/CLAUDE.md

@@ -166,6 +166,19 @@ These modules have **source code in this repo** but are **intentionally NOT inst
 | `fusion_plating_culture` | `state=uninstalled`, dir removed from entech disk | Soft people-ops feature (peer kudos / "Fundamental of the Week"); zero data entered; not a client priority. Top-level "Culture" menu confused operators. | Ask the client whether they want it before reinstalling. If yes: re-sync folder + `-i fusion_plating_culture` + seed a value set. |
 | `fusion_plating_sensors` | deleted entirely (not in repo anymore) | Duplicated `fusion_plating_iot`'s scope but with no working alerting logic. Its valuables (sensor_type taxonomy, dashboard, location flexibility) were ported into `fusion_iot/fusion_plating_iot/`. | N/A — gone. Any new sensor work goes in `fusion_iot/fusion_plating_iot/`. |
 
+## Shop-floor action endpoints — credit the correct tech via `tablet_tech_id`
+The tablet sits on a long-lived "shopfloor service" Odoo session shared by many techs. The actual tech-of-record is established via the PIN unlock (Phase 6); their id lives in the OWL `fp_shopfloor_tech_store` service and is sent as `tablet_tech_id` on every action RPC.
+
+When writing a NEW shop-floor controller endpoint that **writes** (creates a record, calls a `button_*` method, posts to chatter):
+1. Add `tablet_tech_id=None` as a kwarg on the route handler.
+2. At the top, call: `env = env_for_tablet_tech(request.env, tablet_tech_id)` (from `fusion_plating_shopfloor/controllers/_tablet_audit.py`).
+3. Use `env` (not `request.env`) for all subsequent writes. `env.with_user(...)` is applied internally so `create_uid` / `write_uid` / chatter authorship carry the right uid.
+4. Read-only endpoints (load / kanban / funnel / overview) don't need this — leave them as `request.env`.
+
+On the client side: use `fpRpc()` from `services/fp_rpc.js` (drop-in for `rpc()`) for action calls. It auto-injects `tablet_tech_id`. Read calls can keep using plain `rpc()`.
+
+If `tablet_tech_id` is missing or invalid, `env_for_tablet_tech` falls back to the session uid — old callers and pre-Phase-6.3 endpoints continue working.
+
 ## Removing menus/records — Odoo does NOT auto-delete orphans
 Deleting a `<menuitem>` (or any `<record>`) from a data XML file does NOT remove the corresponding database row. The XML loader only updates records it sees; orphans persist in `ir.ui.menu` / `ir.model.data` until you delete them explicitly. Symptom: the menu still appears in the UI after `-u`. Fix — add a `<delete>` directive in a data file with `noupdate="0"`:
 ```xml

fusion_plating/fusion_plating_shopfloor/__manifest__.py

@@ -5,7 +5,7 @@
 
 {
     'name': 'Fusion Plating — Shop Floor',
-    'version': '19.0.30.1.0',
+    'version': '19.0.30.2.0',
     'category': 'Manufacturing/Plating',
     'summary': 'Shop-floor tablet stations, QR scanning, bake window enforcer, '
                'first-piece inspection gates.',
@@ -85,6 +85,10 @@ Copyright (c) 2026 Nexa Systems Inc. All rights reserved.
             # ---- Phase 6.2 tablet PIN gate ----
             'fusion_plating_shopfloor/static/src/js/services/tech_store.js',
             'fusion_plating_shopfloor/static/src/js/services/activity_tracker.js',
+            # Phase 6.3 — fpRpc wrapper. MUST load before any consumer
+            # (job_workspace, shopfloor_landing, manager_dashboard,
+            # hold_composer) so `import { fpRpc }` resolves.
+            'fusion_plating_shopfloor/static/src/js/services/fp_rpc.js',
             'fusion_plating_shopfloor/static/src/scss/components/_pin_pad.scss',
             'fusion_plating_shopfloor/static/src/xml/components/pin_pad.xml',
             'fusion_plating_shopfloor/static/src/js/components/pin_pad.js',

fusion_plating/fusion_plating_shopfloor/controllers/_tablet_audit.py

@@ -0,0 +1,42 @@
+# -*- coding: utf-8 -*-
+# Copyright 2026 Nexa Systems Inc.
+# License OPL-1 (Odoo Proprietary License v1.0)
+"""Helper for audit-credit propagation (Phase 6.3 tablet redesign).
+
+Controllers that accept an optional `tablet_tech_id` kwarg use this
+helper to switch their `env` to the tech-of-record before performing
+writes. The result: chatter posts + create_uid/write_uid carry the
+unlocked tech's identity, not the tablet's persistent session user.
+"""
+import logging
+
+_logger = logging.getLogger(__name__)
+
+
+def env_for_tablet_tech(env, tablet_tech_id):
+    """Return an env scoped to `tablet_tech_id` if it's a valid user;
+    otherwise return the original env unchanged.
+
+    Validation: the user must exist and be active. We deliberately do
+    NOT cross-check that they actually unlocked recently — the OWL
+    component is the source of truth for "who's at the tablet right
+    now", and the only path that produces a tablet_tech_id is a
+    successful /fp/tablet/unlock followed by an active session in the
+    OWL tech_store.
+    """
+    if not tablet_tech_id:
+        return env
+    try:
+        tech_id = int(tablet_tech_id)
+    except (TypeError, ValueError):
+        return env
+    User = env['res.users'].sudo()
+    tech = User.browse(tech_id)
+    if not tech.exists() or not tech.active:
+        _logger.warning(
+            "tablet_tech_id %s invalid (not found or inactive); "
+            "falling back to session uid %s",
+            tablet_tech_id, env.uid,
+        )
+        return env
+    return env(user=tech_id)

fusion_plating/fusion_plating_shopfloor/controllers/manager_controller.py

@@ -25,6 +25,8 @@ from odoo import fields, http
 from odoo.addons.fusion_plating.models.fp_tz import fp_format
 from odoo.http import request
 
+from ._tablet_audit import env_for_tablet_tech
+
 _logger = logging.getLogger(__name__)
 
 
@@ -387,7 +389,8 @@ class FpManagerDashboardController(http.Controller):
     # Assign a worker to a step
     # ------------------------------------------------------------------
     @http.route('/fp/manager/assign_worker', type='jsonrpc', auth='user')
-    def assign_worker(self, step_id=None, user_id=None, workorder_id=None, **kwargs):
+    def assign_worker(self, step_id=None, user_id=None, workorder_id=None,
+                      tablet_tech_id=None, **kwargs):
         """Assign an operator to a step. ``step_id`` is the canonical
         kwarg; ``workorder_id`` is accepted as a deprecated alias for
         one release so any caller we missed doesn't break.
@@ -400,7 +403,8 @@ class FpManagerDashboardController(http.Controller):
             step_id = workorder_id
         if not step_id:
             return {'ok': False, 'error': 'step_id required'}
-        step = request.env['fp.job.step'].browse(int(step_id))
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        step = env['fp.job.step'].browse(int(step_id))
         if not step.exists():
             return {'ok': False, 'error': 'Step not found.'}
         step.assigned_user_id = int(user_id) if user_id else False
@@ -415,7 +419,8 @@ class FpManagerDashboardController(http.Controller):
     # Reassign or swap tank on a step
     # ------------------------------------------------------------------
     @http.route('/fp/manager/assign_tank', type='jsonrpc', auth='user')
-    def assign_tank(self, step_id=None, tank_id=None, workorder_id=None, **kwargs):
+    def assign_tank(self, step_id=None, tank_id=None, workorder_id=None,
+                    tablet_tech_id=None, **kwargs):
         """Swap the tank on a step. ``step_id`` is the canonical kwarg;
         ``workorder_id`` is accepted as a deprecated alias.
         """
@@ -427,7 +432,8 @@ class FpManagerDashboardController(http.Controller):
             step_id = workorder_id
         if not step_id:
             return {'ok': False, 'error': 'step_id required'}
-        step = request.env['fp.job.step'].browse(int(step_id))
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        step = env['fp.job.step'].browse(int(step_id))
         if not step.exists():
             return {'ok': False, 'error': 'Step not found.'}
         step.tank_id = int(tank_id) if tank_id else False
@@ -442,7 +448,8 @@ class FpManagerDashboardController(http.Controller):
     # Manager takes over a step (no-show coverage)
     # ------------------------------------------------------------------
     @http.route('/fp/manager/take_over', type='jsonrpc', auth='user')
-    def take_over(self, step_id=None, workorder_id=None, **kwargs):
+    def take_over(self, step_id=None, workorder_id=None,
+                  tablet_tech_id=None, **kwargs):
         """Manager takes over a step. ``step_id`` is the canonical kwarg;
         ``workorder_id`` is accepted as a deprecated alias.
         """
@@ -454,10 +461,11 @@ class FpManagerDashboardController(http.Controller):
             step_id = workorder_id
         if not step_id:
             return {'ok': False, 'error': 'step_id required'}
-        step = request.env['fp.job.step'].browse(int(step_id))
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        step = env['fp.job.step'].browse(int(step_id))
         if not step.exists():
             return {'ok': False, 'error': 'Step not found.'}
-        user = request.env.user
+        user = env.user
         previous = step.assigned_user_id.name or '—'
         step.assigned_user_id = user.id
         step.message_post(

fusion_plating/fusion_plating_shopfloor/controllers/shopfloor_controller.py

@@ -20,6 +20,8 @@ from odoo.addons.fusion_plating.models.fp_tz import (
 from odoo.exceptions import UserError
 from odoo.http import request
 
+from ._tablet_audit import env_for_tablet_tech
+
 _logger = logging.getLogger(__name__)
 
 
@@ -255,11 +257,13 @@ class FpShopfloorController(http.Controller):
     # Quick chemistry log from the tablet
     # ----------------------------------------------------------------------
     @http.route('/fp/shopfloor/log_chemistry', type='jsonrpc', auth='user')
-    def log_chemistry(self, bath_id, readings, shift=None, notes=None):
+    def log_chemistry(self, bath_id, readings, shift=None, notes=None,
+                      tablet_tech_id=None):
         """Create a fusion.plating.bath.log with one line per reading."""
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
         if not bath_id:
             raise UserError("bath_id required")
-        bath = request.env['fusion.plating.bath'].browse(int(bath_id))
+        bath = env['fusion.plating.bath'].browse(int(bath_id))
         if not bath.exists():
             raise UserError(f"Bath {bath_id} not found")
 
@@ -274,7 +278,7 @@ class FpShopfloorController(http.Controller):
                 'value': float(value) if value not in (None, '') else 0.0,
             }))
 
-        log = request.env['fusion.plating.bath.log'].create({
+        log = env['fusion.plating.bath.log'].create({
             'bath_id': bath.id,
             'shift': shift or False,
             'notes': notes or False,
@@ -291,10 +295,11 @@ class FpShopfloorController(http.Controller):
     # Bake window controls
     # ----------------------------------------------------------------------
     @http.route('/fp/shopfloor/start_bake', type='jsonrpc', auth='user')
-    def start_bake(self, bake_window_id, oven_id=None):
+    def start_bake(self, bake_window_id, oven_id=None, tablet_tech_id=None):
         # action_start_bake raises UserError for S6 missed_window. Wrap
         # the same way as start_wo so operator gets a clean flash.
-        bw = request.env['fusion.plating.bake.window'].browse(int(bake_window_id))
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        bw = env['fusion.plating.bake.window'].browse(int(bake_window_id))
         if not bw.exists():
             return {'ok': False, 'error': f'Bake window {bake_window_id} not found'}
         if oven_id:
@@ -306,12 +311,13 @@ class FpShopfloorController(http.Controller):
         return {
             'ok': True,
             'state': bw.state,
-            'bake_start_time': fp_format(request.env, bw.bake_start_time),
+            'bake_start_time': fp_format(env, bw.bake_start_time),
         }
 
     @http.route('/fp/shopfloor/end_bake', type='jsonrpc', auth='user')
-    def end_bake(self, bake_window_id):
-        bw = request.env['fusion.plating.bake.window'].browse(int(bake_window_id))
+    def end_bake(self, bake_window_id, tablet_tech_id=None):
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        bw = env['fusion.plating.bake.window'].browse(int(bake_window_id))
         if not bw.exists():
             return {'ok': False, 'error': f'Bake window {bake_window_id} not found'}
         try:
@@ -321,7 +327,7 @@ class FpShopfloorController(http.Controller):
         return {
             'ok': True,
             'state': bw.state,
-            'bake_end_time': fp_format(request.env, bw.bake_end_time),
+            'bake_end_time': fp_format(env, bw.bake_end_time),
             'bake_duration_hours': bw.bake_duration_hours,
         }
 
@@ -340,8 +346,15 @@ class FpShopfloorController(http.Controller):
         step = request.env['fp.job.step'].browse(int(sid))
         return step if step.exists() else False
 
+    def _resolve_step_in_env(self, env, step_id=None, workorder_id=None):
+        sid = step_id if step_id else workorder_id
+        if not sid:
+            return False
+        step = env['fp.job.step'].browse(int(sid))
+        return step if step.exists() else False
+
     @http.route('/fp/shopfloor/start_wo', type='jsonrpc', auth='user')
-    def start_wo(self, workorder_id=None, step_id=None):
+    def start_wo(self, workorder_id=None, step_id=None, tablet_tech_id=None):
         """Start the timer on a fp.job.step (called from the tablet).
 
         button_start() can raise UserError for any guarded condition
@@ -350,7 +363,8 @@ class FpShopfloorController(http.Controller):
         the explicit state check, so the tablet flashes a clean toast
         instead of popping a stack-trace dialog at the operator.
         """
-        step = self._resolve_step(step_id, workorder_id)
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        step = self._resolve_step_in_env(env, step_id, workorder_id)
         if not step:
             return {'ok': False, 'error': 'Step not found'}
         if not _step_can_start(step):
@@ -369,7 +383,8 @@ class FpShopfloorController(http.Controller):
         }
 
     @http.route('/fp/shopfloor/stop_wo', type='jsonrpc', auth='user')
-    def stop_wo(self, workorder_id=None, step_id=None, finish=False):
+    def stop_wo(self, workorder_id=None, step_id=None, finish=False,
+                tablet_tech_id=None):
         """Finish the timer on a fp.job.step.
 
         finish=True calls button_finish(); other values are no-ops for
@@ -380,7 +395,8 @@ class FpShopfloorController(http.Controller):
         not provided). Wrapped same as start_wo so the operator gets a
         clean flash, not a stack-trace dialog.
         """
-        step = self._resolve_step(step_id, workorder_id)
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        step = self._resolve_step_in_env(env, step_id, workorder_id)
         if not step:
             return {'ok': False, 'error': 'Step not found'}
         if finish:
@@ -409,11 +425,12 @@ class FpShopfloorController(http.Controller):
     # both with a single tap. Scrap auto-spawns a hold via fp.job.write
     # (S17 hook, no extra wiring needed here).
     @http.route('/fp/shopfloor/bump_qty_done', type='jsonrpc', auth='user')
-    def bump_qty_done(self, job_id, delta=1):
+    def bump_qty_done(self, job_id, delta=1, tablet_tech_id=None):
         """Increment job.qty_done by `delta` (defaults to +1).
         Returns the new totals so the tablet can update without a full refresh.
         """
-        job = request.env['fp.job'].browse(int(job_id))
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        job = env['fp.job'].browse(int(job_id))
         if not job.exists():
             return {'ok': False, 'error': 'Job not found'}
         try:
@@ -433,13 +450,15 @@ class FpShopfloorController(http.Controller):
         }
 
     @http.route('/fp/shopfloor/bump_qty_scrapped', type='jsonrpc', auth='user')
-    def bump_qty_scrapped(self, job_id, delta=1, reason=None):
+    def bump_qty_scrapped(self, job_id, delta=1, reason=None,
+                          tablet_tech_id=None):
         """Increment job.qty_scrapped by `delta`. The S17 write-hook on
         fp.job auto-spawns a fusion.plating.quality.hold for the delta;
         the operator can edit the description on that hold later.
         `reason` is optional — passed through to the hold's description.
         """
-        job = request.env['fp.job'].browse(int(job_id))
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        job = env['fp.job'].browse(int(job_id))
         if not job.exists():
             return {'ok': False, 'error': 'Job not found'}
         try:
@@ -470,20 +489,22 @@ class FpShopfloorController(http.Controller):
                               position_label=None, reading_number=None,
                               equipment_model=None, calibration_std_ref=None,
                               microscope_image=None,
-                              microscope_image_filename=None):
+                              microscope_image_filename=None,
+                              tablet_tech_id=None):
         """Record a single Fischerscope reading against a job.
 
         `job_id` is the canonical kwarg; `production_id` is accepted as an
         alias for older clients. The reading auto-links to an existing
         CoC certificate for the job when one exists.
         """
-        Reading = request.env.get('fp.thickness.reading')
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        Reading = env.get('fp.thickness.reading')
         if Reading is None:
             return {'ok': False, 'error': 'Certificates module not installed'}
         target_id = job_id or production_id
         if not target_id:
             return {'ok': False, 'error': 'job_id required'}
-        job = request.env['fp.job'].browse(int(target_id))
+        job = env['fp.job'].browse(int(target_id))
         if not job.exists():
             return {'ok': False, 'error': f'Job {target_id} not found'}
 
@@ -508,7 +529,7 @@ class FpShopfloorController(http.Controller):
             'ni_percent': float(ni_percent or 0.0),
             'p_percent': float(p_percent or 0.0),
             'position_label': position_label or '',
-            'operator_id': request.env.user.id,
+            'operator_id': env.user.id,
         }
 
         if equipment_model:
@@ -516,7 +537,7 @@ class FpShopfloorController(http.Controller):
         if calibration_std_ref:
             vals['calibration_std_ref'] = calibration_std_ref
         if microscope_image:
-            att = request.env['ir.attachment'].create({
+            att = env['ir.attachment'].create({
                 'name': microscope_image_filename or f'thickness_{reading_number}.jpg',
                 'datas': microscope_image,
                 'res_model': 'fp.thickness.reading',
@@ -525,7 +546,7 @@ class FpShopfloorController(http.Controller):
             vals['microscope_image_id'] = att.id
 
         # Auto-link to an existing CoC if there is one for this job.
-        Cert = request.env.get('fp.certificate')
+        Cert = env.get('fp.certificate')
         if Cert is not None:
             if 'x_fc_job_id' in Cert._fields:
                 cert_field = 'x_fc_job_id'
@@ -557,7 +578,8 @@ class FpShopfloorController(http.Controller):
                      part_ref=None, qty_on_hold=0, qty_original=0,
                      hold_reason='other', description=None,
                      mark_for_scrap=False, facility_id=None,
-                     work_center_id=None, current_process_node=None):
+                     work_center_id=None, current_process_node=None,
+                     tablet_tech_id=None):
         """Create a quality hold record, splitting qty from the original lot.
 
         The hold is linked to the fp.job and (when provided) the
@@ -566,7 +588,8 @@ class FpShopfloorController(http.Controller):
         if not qty_on_hold or int(qty_on_hold) <= 0:
             raise UserError("qty_on_hold must be a positive integer.")
 
-        Hold = request.env['fusion.plating.quality.hold']
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        Hold = env['fusion.plating.quality.hold']
 
         vals = {
             'part_ref': part_ref or '',
@@ -583,7 +606,7 @@ class FpShopfloorController(http.Controller):
         if work_center_id:
             vals['work_center_id'] = int(work_center_id)
         if portal_job_id:
-            pj = request.env['fusion.plating.portal.job'].browse(
+            pj = env['fusion.plating.portal.job'].browse(
                 int(portal_job_id),
             )
             if pj.exists():
@@ -594,7 +617,7 @@ class FpShopfloorController(http.Controller):
         # via fusion_plating_jobs (Phase 3) as `x_fc_job_id` / `x_fc_step_id`.
         step_target_id = step_id or workorder_id
         if step_target_id:
-            step = request.env['fp.job.step'].browse(int(step_target_id))
+            step = env['fp.job.step'].browse(int(step_target_id))
             if step.exists():
                 if 'x_fc_step_id' in Hold._fields:
                     vals['x_fc_step_id'] = step.id
@@ -605,7 +628,7 @@ class FpShopfloorController(http.Controller):
         # set it through the step.
         if (job_id and 'x_fc_job_id' in Hold._fields
                 and not vals.get('x_fc_job_id')):
-            j = request.env['fp.job'].browse(int(job_id))
+            j = env['fp.job'].browse(int(job_id))
             if j.exists():
                 vals['x_fc_job_id'] = j.id
 
@@ -995,8 +1018,9 @@ class FpShopfloorController(http.Controller):
     # Mark a first-piece gate result from the tablet
     # ----------------------------------------------------------------------
     @http.route('/fp/shopfloor/mark_gate', type='jsonrpc', auth='user')
-    def mark_gate(self, gate_id, result):
-        gate = request.env['fusion.plating.first.piece.gate'].browse(int(gate_id))
+    def mark_gate(self, gate_id, result, tablet_tech_id=None):
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        gate = env['fusion.plating.first.piece.gate'].browse(int(gate_id))
         if not gate.exists():
             return {'ok': False, 'error': 'Gate not found.'}
         try:
@@ -1084,21 +1108,23 @@ class FpShopfloorController(http.Controller):
     @http.route('/fp/shopfloor/plant_overview/move_card',
                 type='jsonrpc', auth='user')
     def plant_overview_move_card(self, card_id, source_model=None,
-                                 target_workcenter_id=None):
+                                 target_workcenter_id=None,
+                                 tablet_tech_id=None):
         """Move a step card to a different work centre (drag & drop).
 
         `source_model` is accepted for backward compatibility but ignored —
         Plant Overview now only ever serves fp.job.step cards. A target
         of 0 / falsy clears the work centre.
         """
-        Step = request.env['fp.job.step']
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
+        Step = env['fp.job.step']
         step = Step.browse(int(card_id))
         if not step.exists():
             return {'ok': False, 'error': f'Step {card_id} not found.'}
 
         wc_id = int(target_workcenter_id) if target_workcenter_id else False
         if wc_id:
-            wc = request.env['fp.work.centre'].browse(wc_id)
+            wc = env['fp.work.centre'].browse(wc_id)
             if not wc.exists():
                 return {'ok': False,
                         'error': f'Work centre {target_workcenter_id} not found.'}
@@ -1108,7 +1134,7 @@ class FpShopfloorController(http.Controller):
             _logger.info(
                 'Plant Overview: moved step %s (%s) → WC %s by uid %s',
                 step.id, step.name, wc_id or 'unassigned',
-                request.env.uid,
+                env.uid,
             )
         except Exception as exc:
             _logger.exception('Plant Overview move_card failed')

fusion_plating/fusion_plating_shopfloor/controllers/workspace_controller.py

@@ -23,6 +23,8 @@ from odoo import fields, http
 from odoo.addons.fusion_plating.models.fp_tz import fp_format
 from odoo.http import request
 
+from ._tablet_audit import env_for_tablet_tech
+
 _logger = logging.getLogger(__name__)
 
 
@@ -190,8 +192,8 @@ class FpWorkspaceController(http.Controller):
     @http.route('/fp/workspace/hold', type='jsonrpc', auth='user')
     def hold(self, job_id, reason='other', qty_on_hold=1, description='',
              part_ref='', step_id=None, mark_for_scrap=False,
-             photo_data=None, photo_filename=None):
-        env = request.env
+             photo_data=None, photo_filename=None, tablet_tech_id=None):
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
         job = env['fp.job'].browse(int(job_id))
         if not job.exists():
             return {'ok': False, 'error': f'Job {job_id} not found'}
@@ -253,8 +255,8 @@ class FpWorkspaceController(http.Controller):
     # /fp/workspace/sign_off — capture signature + finish step atomically
     # ======================================================================
     @http.route('/fp/workspace/sign_off', type='jsonrpc', auth='user')
-    def sign_off(self, step_id, signature_data_uri):
-        env = request.env
+    def sign_off(self, step_id, signature_data_uri, tablet_tech_id=None):
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
         sig = (signature_data_uri or '').strip()
         if not sig:
             _logger.warning("workspace/sign_off: empty signature for step %s", step_id)
@@ -302,8 +304,8 @@ class FpWorkspaceController(http.Controller):
     # /fp/workspace/advance_milestone — fire next_milestone_action
     # ======================================================================
     @http.route('/fp/workspace/advance_milestone', type='jsonrpc', auth='user')
-    def advance_milestone(self, job_id):
-        env = request.env
+    def advance_milestone(self, job_id, tablet_tech_id=None):
+        env = env_for_tablet_tech(request.env, tablet_tech_id)
         job = env['fp.job'].browse(int(job_id))
         if not job.exists():
             return {'ok': False, 'error': f'Job {job_id} not found'}

fusion_plating/fusion_plating_shopfloor/static/src/js/components/hold_composer.js

@@ -14,7 +14,7 @@
 
 import { Component, useState } from "@odoo/owl";
 import { Dialog } from "@web/core/dialog/dialog";
-import { rpc } from "@web/core/network/rpc";
+import { fpRpc } from "../services/fp_rpc";
 import { useService } from "@web/core/utils/hooks";
 
 // Hold reasons kept here so the picker doesn't need a server roundtrip.
@@ -75,7 +75,7 @@ export class FpHoldComposer extends Component {
         }
         this.state.submitting = true;
         try {
-            const res = await rpc("/fp/workspace/hold", {
+            const res = await fpRpc("/fp/workspace/hold", {
                 job_id: this.props.jobId,
                 step_id: this.props.stepId || null,
                 part_ref: this.props.partRef || "",

fusion_plating/fusion_plating_shopfloor/static/src/js/job_workspace.js

@@ -20,6 +20,7 @@
 import { Component, useState, onMounted, onWillUnmount } from "@odoo/owl";
 import { registry } from "@web/core/registry";
 import { rpc } from "@web/core/network/rpc";
+import { fpRpc } from "./services/fp_rpc";
 import { useService } from "@web/core/utils/hooks";
 import { WorkflowChip } from "./components/workflow_chip";
 import { GateViz } from "./components/gate_viz";
@@ -116,7 +117,7 @@ export class FpJobWorkspace extends Component {
     // ---- Step actions ------------------------------------------------------
     async onStartStep(stepId) {
         try {
-            const res = await rpc("/fp/shopfloor/start_wo", { workorder_id: stepId });
+            const res = await fpRpc("/fp/shopfloor/start_wo", { workorder_id: stepId });
             if (res && res.ok) {
                 this.notification.add("Step started.", { type: "success" });
                 await this.refresh();
@@ -135,7 +136,7 @@ export class FpJobWorkspace extends Component {
                 contextLabel: `${this.state.data.job.display_wo_name} · Step ${step.sequence_display}: ${step.name}`,
                 onSubmit: async (dataUri) => {
                     try {
-                        const res = await rpc("/fp/workspace/sign_off", {
+                        const res = await fpRpc("/fp/workspace/sign_off", {
                             step_id: step.id,
                             signature_data_uri: dataUri,
                         });
@@ -154,7 +155,7 @@ export class FpJobWorkspace extends Component {
         }
         // Plain finish — no signature required
         try {
-            const res = await rpc("/fp/shopfloor/stop_wo", {
+            const res = await fpRpc("/fp/shopfloor/stop_wo", {
                 workorder_id: step.id, finish: true,
             });
             if (res && res.ok) {
@@ -201,7 +202,7 @@ export class FpJobWorkspace extends Component {
 
     async onAdvanceMilestone() {
         try {
-            const res = await rpc("/fp/workspace/advance_milestone", {
+            const res = await fpRpc("/fp/workspace/advance_milestone", {
                 job_id: this.state.jobId,
             });
             if (res && res.ok) {

fusion_plating/fusion_plating_shopfloor/static/src/js/manager_dashboard.js

@@ -15,6 +15,7 @@
 import { Component, useState, onMounted, onWillUnmount } from "@odoo/owl";
 import { registry } from "@web/core/registry";
 import { rpc } from "@web/core/network/rpc";
+import { fpRpc } from "./services/fp_rpc";
 import { useService } from "@web/core/utils/hooks";
 import { QrScanner } from "./qr_scanner";
 import { FpTabletLock } from "./tablet_lock";
@@ -208,7 +209,7 @@ export class ManagerDashboard extends Component {
     async onAssignWorker(step, userIdRaw) {
         const userId = parseInt(userIdRaw) || null;
         try {
-            const res = await rpc("/fp/manager/assign_worker", {
+            const res = await fpRpc("/fp/manager/assign_worker", {
                 step_id: step.id, user_id: userId,
             });
             if (res && res.ok) {
@@ -226,7 +227,7 @@ export class ManagerDashboard extends Component {
     async onAssignTank(step, tankIdRaw) {
         const tankId = parseInt(tankIdRaw) || null;
         try {
-            const res = await rpc("/fp/manager/assign_tank", {
+            const res = await fpRpc("/fp/manager/assign_tank", {
                 step_id: step.id, tank_id: tankId,
             });
             if (res && res.ok) {
@@ -243,7 +244,7 @@ export class ManagerDashboard extends Component {
 
     async onTakeOver(step) {
         try {
-            const res = await rpc("/fp/manager/take_over", {
+            const res = await fpRpc("/fp/manager/take_over", {
                 step_id: step.id,
             });
             if (res && res.ok) {

fusion_plating/fusion_plating_shopfloor/static/src/js/services/fp_rpc.js

@@ -0,0 +1,42 @@
+/** @odoo-module **/
+// =============================================================================
+// Fusion Plating — fpRpc() wrapper
+//
+// Drop-in replacement for the standard `rpc()` import. Automatically
+// injects the current tablet_tech_id from the tech_store into every
+// call, so server-side endpoints can attribute the action to the right
+// user via env.with_user() (see env_for_tablet_tech in
+// controllers/_tablet_audit.py).
+//
+// USE for any RPC that WRITES (start step, finish step, hold create,
+// sign-off, milestone advance). For read-only loads (kanban, workspace
+// load, manager funnel), plain rpc() is fine.
+//
+// Example:
+//   import { fpRpc } from "../services/fp_rpc";
+//   await fpRpc("/fp/shopfloor/start_wo", { workorder_id: stepId });
+//
+// =============================================================================
+
+import { rpc as baseRpc } from "@web/core/network/rpc";
+
+function _getTechStore() {
+    // Lazy-resolve via the global debug API — avoids circular service init
+    try {
+        const env = odoo.__WOWL_DEBUG__?.root?.env;
+        if (env && env.services && env.services.fp_shopfloor_tech_store) {
+            return env.services.fp_shopfloor_tech_store;
+        }
+    } catch (e) {
+        // ignore
+    }
+    return null;
+}
+
+export function fpRpc(url, params = {}) {
+    const techStore = _getTechStore();
+    if (techStore && techStore.currentTechId) {
+        params = { ...params, tablet_tech_id: techStore.currentTechId };
+    }
+    return baseRpc(url, params);
+}

fusion_plating/fusion_plating_shopfloor/static/src/js/shopfloor_landing.js

@@ -20,6 +20,7 @@
 import { Component, useState, onMounted, onWillUnmount } from "@odoo/owl";
 import { registry } from "@web/core/registry";
 import { rpc } from "@web/core/network/rpc";
+import { fpRpc } from "./services/fp_rpc";
 import { useService } from "@web/core/utils/hooks";
 import { QrScanner } from "./qr_scanner";
 import { FpKanbanCard } from "./components/kanban_card";
@@ -254,7 +255,7 @@ export class FpShopfloorLanding extends Component {
         this._movesInFlight += 1;
         this._lastDropAt = Date.now();
         try {
-            const res = await rpc("/fp/shopfloor/plant_overview/move_card", {
+            const res = await fpRpc("/fp/shopfloor/plant_overview/move_card", {
                 card_id: dragged.id,
                 target_workcenter_id: col.work_center_id,
             });