58 lines
2.3 KiB
Markdown
58 lines
2.3 KiB
Markdown
# Fusion Plating — Aluminum Anodizing Process Pack
|
|
|
|
Part of the Fusion Plating product family by Nexa Systems Inc.
|
|
|
|
Data-only module that plugs into the `fusion_plating` core and seeds the
|
|
process taxonomy and bath chemistry schemas specific to aluminum anodizing.
|
|
No new models, no new views — all records load with `noupdate="1"` so shop
|
|
customisations survive module upgrades.
|
|
|
|
## Process types shipped
|
|
|
|
| Code | Name | Category |
|
|
|---|---|---|
|
|
| AN_TYPE_I | Type I — Chromic Acid Anodize (MIL-A-8625) | Anodizing |
|
|
| AN_TYPE_II | Type II — Sulfuric Anodize, Clear (MIL-A-8625) | Anodizing |
|
|
| AN_TYPE_II_DYE | Type II — Sulfuric Anodize, Dyed (MIL-A-8625) | Anodizing |
|
|
| AN_TYPE_III | Type III — Hardcoat Anodize (MIL-A-8625) | Anodizing |
|
|
| AN_DYE | Dye Immersion | Post-Treatment |
|
|
| AN_SEAL_HOT | Hot Water Seal | Post-Treatment |
|
|
| AN_SEAL_NIAC | Nickel Acetate Seal | Post-Treatment |
|
|
| AN_SEAL_DICHRO | Dichromate Seal | Post-Treatment |
|
|
| AN_BRIGHT | Bright Dip (Pre-Anodize) | Preparation |
|
|
| AN_DESMUT | Desmut (Post-Etch) | Post-Treatment |
|
|
|
|
## Bath parameters shipped
|
|
|
|
Sulfuric acid concentration, dissolved aluminum, bath temperatures (Type II
|
|
room-temp and Type III chilled), current density, voltage, chromic acid
|
|
(Type I), seal bath temperature and pH, nickel acetate concentration, and
|
|
dye concentration/temperature. Per-bath target overrides happen on the
|
|
bath or recipe records in the core.
|
|
|
|
## Hazard awareness
|
|
|
|
- **Type I (chromic acid)** carries the same Cr(VI) carcinogen warnings as
|
|
chrome plating. NPRI Part 1B reportable, Toronto Ch. 681 limits apply,
|
|
mandatory mist suppression and medical surveillance. Prefer Type II
|
|
wherever customer spec allows.
|
|
- **Type II / Type III sulfuric** baths are severe splash hazards.
|
|
Acid-resistant PPE, eyewash within 10 seconds travel, safety shower.
|
|
- **Type III chilled bath** requires mandatory refrigeration and arc flash
|
|
PPE at rectifier voltages up to 90 V+.
|
|
- **Nickel acetate seal** is a WHMIS 2015 Category 1A sensitizer/carcinogen,
|
|
subject to Ontario Reg. 833 air monitoring.
|
|
|
|
## Installation
|
|
|
|
Depends on `fusion_plating` core. Ships no security rules or views of its own.
|
|
|
|
```bash
|
|
docker exec odoo-dev-app odoo -d fusion-dev -u fusion_plating_process_anodize --stop-after-init
|
|
```
|
|
|
|
## License
|
|
|
|
OPL-1 (Odoo Proprietary License v1.0). Copyright (c) 2026 Nexa Systems Inc.
|
|
All rights reserved.
|